Description

This kitchen is an example of an interesting combination of textures. The bottom and top of the headset look different. The glossy white top reflects and multiplies the sunlight in the kitchen, it looks weightless, despite the rather large size of the cabinets. The bottom, on the other hand, has a matte surface. The dark gray hue of its facades is deep and rich. Each door has a built-in aluminum profile handle. In fact, both of the fronts are acrylic. It is based on MDF board, which is coated with a special polymer. The surface can be either glossy or matte, but it is essentially the same material, very durable and resistant. The countertop in the kitchen is located in the main area, then it goes under the window and ends with a bar counter. To make the part of the countertop, which replaces the window sill, flush with the main work area, the set had to be made a little higher than usual. For this purpose, the cabinets of the lower tier have high legs and a plinth that covers them. It is made of chipboard, its height is 16 cm. The upper row of cabinets has three fronts in height and reaches to the ceiling. The lower fronts are made with built-in aluminum handles, and the others are opened by pressing. In the leftmost cabinet built-in microwave oven, in order to properly place it requires a certain depth of the recess for installation. Since for this model it is more than the standard 30 cm, all the upper cabinets are made a little more depth. The deepest element of the upper tier is the cabinet above the refrigerator. Standing forward, it gives the impression that the refrigerator is built into the set. The fittings used in the project were made by various companies: Hettich hinges with door closers and tandem box pull-out systems; Blum lifting mechanisms, tip-on for push opening and special hinges for these cabinets, Vauth-Sagel pull-out cargo.